The MTM High Resolution Thickness Monitor will fit any of the Cressington sputter and carbon coating systems as well as other thin film vacuum coating systems which allow for a vacuum feedthrough of 10 mm diameter a on a plate thickness of 9 mm.

General Specifications:	Microprocessor based� 4-digit display� push-button zero 6MHz crystal with lifetime check 5 times per second update rate
Thickness Range:	0.0 - 999.9nm (pos/neg)
Resolution:	0.1nm for carbon
Density Range:	0.50 - 30.00g/cm?
Tooling Factor Range:	0.25 - 8.0
Processor Function:	Four sets of values can be stored in memory underDensityand four underToolingfor both the MTM-10 and MTM20
MTM-20 Controller:	MTM-20 only: Programmable thickness termination function with termination interface cable on 108 auto� 208HR and DC-100 Termination facility range 0-999.9nm

General Specifications:

Microprocessor based� 4-digit display� push-button zero

6MHz crystal with lifetime check

5 times per second update rate

Thickness Range:0.0 - 999.9nm (pos/neg)

Resolution:0.1nm for carbon

Density Range:0.50 - 30.00g/cm