美国RKI六合一有毒有害气体检测仪eagle 2

Enclosure

Weatherproof� chemical resistant� anti RFI / EMI coated high impact polycarbonate - PBT

blend. Can operate in rain or be set into 2.0� of water without leakage. Ergonomically

balanced with rugged top mounted handle.

Dimensions 9.5� L x 5.25� W x 5.875� H (241mm L x 140mm W x 149mm H)

Weight 3.8 Lbs (1.72kg) (standard 4 gas with batteries)

Detection Principle Catalytic combustion� electrochemical� galvanic� infrared�

photo ionization� and thermal conductivity.

Sensor Life 2 Years under normal conditions.

Sampling Method Powerful� long-life pump (over 6�?00 hours) can draw samples over 125 feet.

Flow rate approximately 2.0 SCFH

Display

Backlit 128 x 64 graphics display. Viewed through window in case top. Displays

readings & status of all 6 channels simultaneously. Backlight� illuminates for alarms and

by demand with adjustable time. Optional mode allows automatic or manual scrolling

display of just one gas at a time with very large characters.

Language Readout can display in 5 languages (English� French� German� Italian� or Spanish).

Alarms 2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully

adjustable for levels� latching or self reset� and silenceable.

Alarm Method Buzzer 95 dB at 30 cm� four high intensity LED’s.

Controls

4 External glove friendly push buttons for operation� demand zero� and autocalibration.

Buttons also access LEL/ppm� % Vol. alarm silence� peak hold� TWA/STEL values�

battery status� conversion factors� and many other features.

Continuous Operation At 70��F� (21��C) 16 hours using alkaline batteries� or 18 hours using Ni-MH.

Power Source 4 Alkaline or Ni-MH� size C batteries (Charger has alkaline recognition

to prevent battery damage if charging is attempted with alkalines).

Operating Temp. &

Humidity -4��F to 122��F (-20��C to 50��C) 0 to 95% RH� non-condensing.

Response Time 30 Seconds to 90% of range (for most gases) using standard 5 ft hose.

Safety Rating

Intrinsically Safe� Class I� Division 1� Groups A� B� C� D.

Approvals:

Standard Accessories Shoulder strap� alkaline batteries� hydrophobic probe� 5 foot hose� and

internal hydrophobic filter

Optional Accessories

? Dilution fitting (50/50)

? Ni-MH batteries

? Battery charger� 115 VAC� 220 VAC� or 12 VDC (charge time 4 hours)/

continuous operation adapter� 115 VAC or 12 VDC

? Extension hoses

Warranty Two year material and workmanship� one year for PID sensor