仪器简今�/span>Description９�/span>

单根电线电缆燃烧测试仪用于测试电线电缆在过热、过流等非正常状态下，其绝缘层的阻燃性能。应用于线电缆或光缆的垂直火焰蔓延测试，同时可检验在火焰条件下滴露物的燃烧状况、�/span>

Single cable combustion Tester is used to test wires and cables in heat� flow under abnormal conditions� such as� the insulating layer of fire-retardant properties. Vertical flame spread test for cables or fiber-optic cable� also can be tested under fire conditions of dettol combustion.

注：试验箱门为装饰及防尘作用。根据标准要求，实验时需敞开、�/span>

Note: the test box and dust for the door. According to the standard requirements� the door should be open when testing.

符合标准Standard９�/span>

IEC 60332-1-1�?/span>2�?/span>3：�/span>EN 50086-1-1994

GBT 18380.11�?2-2008 (被替代版�?/span>GB/T 12666.2/ GBT 18380.1-2001)

型号Model９�/span>TTech-GBT18380A

主要特点Main features９�/span>

1�触摸屏智能控制系统；中英文操作界靡�/span>

Touch-screen control system/English operation interface (optional)

2�系统自动点火，自动计时，数据自动存储：�/span>

The system auto-ignition� automatic timing� automatic data storage and are free to print test report;

3�?span>试验部分和控制部分组成采用一体化设计，方便现场安装和调试、�/span>

Test and control components using integrated design� convenient installation and debugging.

4�?span>全不锈钢箱体，内部腔体高度为1200mm，宽�?/span>300mm，深度为450mm：�/span>

Stainless steel Cabinet� internal Chamber height for 1200mm� width 300mm mm� depth of 450mm;

5�?span>两根不锈钢钢杆，穿孔加螺栓固定单根电线电缆或光缆试样：�/span>

Two stainless-steel rod� perforation and bolted on a single wire cables or cables sample;

6�?span>燃烧器为预混合型，内径为￟�/span>12��0.5mm，长�?/span>100mm、�/span>1KW混合型标准燃烧器，可提供精准测试火源；控制箱配备压力表、减压阀、转子流量计及切断球阀：�/span>

Burner for premixed type� diameter DIA 12��0.5mm� CA 100mm. 1KW standard burner hybrid� can provide accurate test fire; the control box is equipped with pressure gauge� pressure relief valve� rotor flowmeter and cuts off the ball valve;

7�?span>控制箱体内部配备气体单向阀，提供更多的安全保证：�/span>

The gases inside the control box is equipped with a one-way valve� provide more security assurances;

8�?span>火焰施加时间及持燃时间可�?/span>0｝�/span>99刅�/span>99秒范围内调节。试验过程自动控制、�/span>

Flame flame application time and hold time can be adjusted in the range of 0~99 and 99 seconds. Test process automation.

9�?span>针阀精确调节火焰高度，按标准要求蓝色火焰50mm~60mm�总高170mm~190mm

Needle valve adjust flame height� required by the standard blue flame 50mm~60mm� total height 170mm~190mm

10�?span>针阀控制气体流量：丙烶�/span>650ml/min��30ml/min;空气10L/min��0.5ml/min.

Inlet needle valve controlling gas flow:��30mL/min propane 650ml/min air 10L/min��0.5ml/min.

11�?/strong>气体压力表及调压阀，精确控制气体压力；

Imported brands of gas pressure gauges and pressure regulator� precise control of air pressure;

12�?span>配有火焰高度卡尺、�/span>

flame height gauges

13�?span>带燃气流量计及压力调节；自动点火、�/span>

Withgas flow meter and pressure control; automatic ignition.

规格

型号Model	TTech-GBT18380A
尺寸Size	600(W)��450(D)��1250(H)mm
电源Power	AC 220V� 50/60Hz� 3A
重量Weight	60kg
说明�?/span>Manual	Provide

单根垂直燃烧测试标准差异

本差异比较涉及一下标准：

——GB/T 18380.11-2008 电缆和光缆在火焰条件下的燃烧试验�?1部分（IEC 60332-1-1:2004（�/p>

以下简称标�?1

——GB/T 18380.12-2008 电缆和光缆在火焰条件下的燃烧试验�?2部分（IEC 60332-1-2:2004（�/p>

以下简称标�?2

——GB/T 18380.13-2008 电缆和光缆在火焰条件下的燃烧试验�?2部分（IEC 60332-1-3:2004（�/p>

以下简称标�?3

——GB/T 18380.21-2008 电缆和光缆在火焰条件下的燃烧试验�?2部分（IEC 60332-2-1:2004（�/p>

以下简称标�?1

——GB/T 18380.22-2008 电缆和光缆在火焰条件下的燃烧试验�?2部分（IEC 60332-2-2:2004（�/p>

以下简称标�?2

——GB/T 5169.147-2007 电工电子着火危险试验第14部分（IEC 60695-11-2:2003（�/p>

标准11、标�?2和标�?3所用设备相同、�/p>

标准22和标�?3所用设备相同、�/p>

标准11所用引燃源为《电工电子着火危险试验》第14部分所规定引燃源、�/span>