CAT分散刀夳�/strong>由不锈钢制成，可耐受高温高压消毒。均采用相同的连接头，可与所有驱动电机连接，并易于拆卸与清洗、�/p>

主机

(1)X120hand-held� high speeddrive motor for small volumes� electronically stabilised speed control for tools up to 17 mm� speed: 11.000 - 33.000 rpm� 140 W� 115 or 240 Volt� for shafts T6� T10 and T17.

(2)X360drive motor � 360 Watt� fixed speed: 45.000 rpm� (for speed control please order speed control unit part no. 60493)� 240 Volt� for shafts up to 20 mm (short-time duty).

P1500 Speed control unit for X 360

(3)X520drive unit� 500 Watt� speed: 11.000 - 29.000 rpm� for dispersing tools up to 30 mm (short- time duty only!!!) 115 or 240 Volt.

(4)X520Dsame as X 520 but with LCD-display for speed

(5)X620drive unit� 600 Watt� built-in speed control� 8.000 - 24.000 rpm. Only in 240 Volt available.

(6)X1030powerful and robust drive motor� 1 kW� with electronic speed control� for tools up to 30 mm Speed range: 10.000 - 24.000 rpm

(7)X1030Das X1030 but with LCD display

(8)X1740Very powerful drive motor� steplessly adjustable� without display� suitable for all shafts up to T/G 40� 5.000 - 22.000 rpm� 1500 Watt.

(9)XP28Compressed-air motor� air consumption 0�?m³/min at 6 bar pressure� max. 28.000 rpm

(10)XP44Compressed-air motor� air consumption 0�?5m³/min at 6 bar pressure� max. 44.000 rpm

数显型主朹�/h1>

�?）X520D same as X 520 but with LCD-display for speed

�?）X1030D same as X1030 but with LCD display

分散刀其�/h1>

T6 Shaft� 6 mm diameter� 55 mm long� complete with generator

T6 Shaft� 6 mm diameter� 120 mm long� complete with generator

T10 Shaft� 10 mm diameter complete with generator

T17 Shaft� 10 mm diameter� complete with 17 mm generator

T20 Shaft� 20 mm diameter� complete with generator

G20 Shaft� 20 mm diameter� complete with generator

T30 Shaft� 20 mm diameter� complete with 30 mm generator

G30 Shaft� 20 mm diameter� complete with 30 mm generator

T40 Shaft� 20 mm diameter� complete with 40 mm generator

G40 Shaft� 20 mm diameter� complete with 40 mm generator

additional charge for knife generator

"*Please add one of the capitol letters to the order no. When ordering shafts:

- V = for medium viscosities

- N = for low viscosities

- F = for fine dispersion tasks

- M = knife generator (e.g. cut down of drugs� tissues)"

连续流研�?/h1>

�?）DK30 Flow Through Chamber for shafts G20 and G30

�?）DK40 Inline-disperser consisting of drive unit X 1740� flow-through chamber with external cooling� bench mounting device and G 40 generator. Also available without drive unit� if there already is an X1740 drive unit

说明：更多产品信息请与我们联系或登录