产品性能９�/p>

Remarks:

1. All the typical value is based on the 1.6mm specimen. Test method is according to IPC-TM-650.

2.All the typical values listed above are for your reference only and not intended fors pecification. Please contact Shengyi Technology Co., Ltd. for detailed information. All rights from this data sheet are reserved by Shengyi Technology Co., Ltd.

Explanation: C=Humidity conditioning, D=Immersion conditioning in distilled water, E=Temperature conditioning

The first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in � and the third digit the relative humidity.

Items	Method	Condition	Unit	Typical Value
Tg	2.4.24.4	DMA	ℂ�/td>	160
	2.4.25D	DSC		155
Td	2.4.24.6	5% wt. loss	ℂ�/td>	348
T288	2.4.24.1	TMA	min	20
T260	2.4.24.1	TMA	min	60
Thermal Stress	2.4.13.1	288�? solder dip	-	>100s No Delamination
CTE (Z-axis)	2.4.24	Before Tg	ppm/ℂ�/td>	37
		After Tg	ppm/ℂ�/td>	230
		50-260ℂ�/td>	%	2.8
Dissipation Constant (1GHz)	2.5.5.9	C-24/23/50	-	4.6
Dissipation Factor (1GHz)	2.5.5.9	C-24/23/50	-	0.011
Volume Resistivity	2.5.17.1	C-96/35/90	MΩ.cm	1.5×108
Surface Resistivity	2.5.17.1	C-96/35/90	MΩ	3.5×107
Arc Resistance	2.5.1	D-48/50+D-0.5/23	s	150
Dielectric Breakdown	2.5.6	D-48/50+D-0.5/23	kV	45+kV NB
Peel Strength (1Oz)	2.4.8	288�?10s	N/mm	1.3
Flexural Strength (LW/CW)	2.4.4	A	MPa	530/440
Water Absorption	2.6.2.1	E-1/105+D-24/23	%	0.09
Flammability	UL94	C-48/23/50	Rating	V-0
CTI	IEC60112	A	Rating	PLC3