仪器

CODE	PART NAME	REMARKS
APM-00-015	apm-8	Pensky-Martens Closed Cup Flash Point Tester宾斯�?马丁闭口杯法闪点试验�?/strong>

标准附件

CODE	PART NAME	Qty	REMARKS
APM-02-001	Test Cup Assembly油杯	1
320-00-035	Thermofuse热熔东�/strong>	1	Pack of 5� with Insulation Tube. 5只装，带绝缘箠�/td>
210-02-161	Gas Hose?9 x?16� 1.5m with Hose Bands带夹箍煤气管	1
APM-04-431	Windscreen for apm-8挡风�?/strong>	1
――—�/td>	apm-8 MANUALS操作手册	1	Manuals for apm-8.

选购附件

CODE	PART NAME	REMARKS
070-00-068	Printer� BS2-80TS BS2-80TS型打印机	Prints out test data and instrument settings. 仪器设置和试验数据的打印
070-00-281	Mini USB Keyboard迷你USB键盘	Sample ID entering 样品名输�?/td>

2年备件选购

CODE	PART NAME	Qty
APM-02-001	Test Cup Assembly油杯	1
320-00-035	Thermofuse热熔东�/strong>	1
ABL-01-003	Electric Igniter� EI-8电子点火夳�/strong>	2
APM-04-031	Temperature Sensor for apm-8温度传感�?/strong>	1
APM-03-032	Flash detector for APM-7/apm-8	1

仪器特点

1.SINGLE ACTION SETTING单一动作设定

The flash detector rings and the temperature sensor are permanently mounted on a swing-arm assembly� which allows an easy setting of the specimen闪点检测环和温度传感器一起组装在测试摇臂上，加样便捷

2. EASY OPERATION 操作简協�/p>

Select a test mode and enter the expected flash point; while the instrument executes the test� you are free to do other lab work. The instrument follows the exact procedures prescribed in the test method� and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module.只需选好试验模式，输入预期闪点，仪器就严格按照标准自动进行测试，实验结束蜂鸣报警，显示试验结果、�/p>

3. INTERCHANGEABLE IGNITION SOURCE 可互换的点火溏�/p>

apm-8 is equipped with both gas and electric igniter as the ignition source. It only takes a few minutes to switch from gas to electric or vice versa.

气、电点火两用，切换便捶�/p>

4. DRAFT PROTECTION SHIELD COVER 保护�?/p>

A FM4910 conforming cover insures the flame integrity. This material shall meet the numerical criterion of each index. (1)FPI(Fire Propagation Index)�? (2)SDI(Smoke Damage Index)�?.4

********************************************************************************************************

5. DATA HANDLING 数据处理

The unit is equipped to store up to 200 test results and export to an optional printer or to a LIMS through an RS-232 port or USB memory.

试验结果可以保存200个，试验结果可以选购打印机打印，也可以通过USB� RS-232将数据导出到LIMS、�/p>

6. USB PORT USB接口

A USB port allows connecting USB keyboard for easy entering sample name and connecting USB flash memory for data copy to a PC or test conditions/parameters copy to the tester.

USB接口可以接USB键盘（选购件）用于样品名称的输入，也可以接闪存copy试验参数

6.PASSWORD PROTECTION 密码保护

With setting up password by the administrator� the device is protected against inadvertent change of parameters by the operator.

试验程序有密码保护功能，可以防止误操佛�/p>

7. ALL-IN ONE DESIGN IN LIGHTWEIGHT 轻盈的一体式设计

The all-in-one design is much lighter than old model� APM-7 by approximately 30%� which is world's smallest class in volume.

比APM-7�?0%左右，也是全球体�?小的宾斯�?马丁闭口杯法闪点试验�?/strong>

规格

机型	一体式设计，微处理器控刵�/td>
试验标准	ISO 2719� ASTM D93� GB/T261
测试范围	室温 � 370ℂ�/td>
测试模式	标准模式 特殊模式
加热�?/strong>	带式加热�?/td>
冷却装置	强制风冷
显示	5.7英寸彩色液晶显示
搅拌	100�?50rpm(可�?
温度传感�?/strong>	带不锈钢衬套的PT-100
闪点检测器	CRC 热电偵�/td>
点火溏�/strong>	气、电点火
大气压修止�/strong>	通过内置的压力传感器自动补正
接口	RS-232C = 1 USB=1
安全设置	以下情况仪器停止运行，同时蜂鸣报警，屏幕显示 (a)高于预设闪点20℃以上或超过370℃时 (b)温度传感器故際�/p> (c)，闪点检测传感器故障 (d)，热熔丝断开 (e)内置电池电能耗尽 (f) 检测臂未到佌�/p> (g)微机失控 (i)搅拌电机停转
气源（使用气点火时）	液化气或天然气（不超�?0kpa（�/td>
电源	220/240 VAC� 50/60Hz
功率	**720W
能耖�/strong>	170Wh for 1 test
环境温度	10��C to 35��C
外形尺寸	230mm (W) �� 470mm (D) �� 390mm (H) 17kg