CHTXQ-490摇摆多线切割朹�/span>技术参� Main Specifications

设备用途：本机型为满足切割超硬材料或表面粗糙度有严格要求的客户而研发的一款机型，罗拉长度490mm，工作台尺寸200mm/140mm*490mm*160mm，提升产品的切割精度、�/p>

Equipment use: This model is developed to meet the customers who have strict requirements for cutting superhard materials or

surface roughness. The length of the roller is 490mm, the size of the workbench is 200mm/140mm*490mm*160mm, and the

cutting accuracy of the product is improved.

技术特� Brief Introduction

1、铸件机身，使整体结构不变形，高速运转更稳定、�/span>

2、旋转刀架采用分体设计，可按需求调整⻆度，利用三⻆函数运算的方法调顺钢线运动轨迹，保证切割精度、�/span>

3、此机器为下置式摇摆工作台，通过摆动装置自身摆动的同时带动待切割件一起摆动，来实现对待切割件的摆动切割。通过轴承与滑道接触进行滑动带动摇摆架摆动，从而使摇摆架带动摇摆侧板进行摇摆、�/span>

4、更换不同的待切割件时，可调整料板或大理石板的厚度使料的中心与导向块圆弧的中心线重合，增加了料板切割的准确性、�/span>

5、导轮少，导向轮精简�?个、�/span>

6、装载面积为�?00mm/140mm*490mm*160mm，极大的提高了切割精度、�/span>

7、操作使用方便，工作台全面展开，便于材料装卸和罗拉拆装、�/span>

1, the casting body, so that the overall structure is not deformed, high-speed operation is more stable.

2, rotary tool holder adopts split design, can adjust the Angle according to demand, the use of trigonometric function

operation method to adjust the steel line movement track, to ensure cutting accuracy.

3, the machine for the lower type of swing table, through the swing device itself swings at the same time to drive the parts to be cut together to achieve the swinging cutting of the cutting parts. Sliding through the contact between the bearing and

the slide drive the swing frame to swing, so that the swing frame drives the swing side plate to swing.

4. When replacing different parts to be cut, the thickness of the material plate or marble slab can be adjusted to make the center of the material coincide with the center line of the guide block arc, which increases the accuracy of the cutting of the material plate.

5, the guide wheel is less, the guide wheel is simplified to 6.

6, the loading area is: 200mm/140mm*490mm*160mm, greatly improving the cutting accuracy.

7, the operation is easy to use, the workbench is fully developed, easy to load