faultless and comparable analysis is closely linked to an accurate sample handling.Only a sample representative of the initial material can provide meaningful analysis results. Sample splittersensure the representativeness of a sample and thus the reproducibility of the analysis.

The RT 100 XL is equipped with a feed hopper with closed outlet. Thus,up to 30 l sample materialmay be evenly spread over the entire width of the hopper. The outlet is opened manually by moving a lever and the sample is splitted. The slots of the dividing head can be adjusted to a maximum width of 108 mm.

The sample splitters RT are ideal for the on-site reduction of sample material. They are easy to use, easy to clean and do not need an electrical power supply.

应用实例

化学制品, 咖啡, 土壤, 坚果, 填充�? 建筑原料, 水泥熔渣, 沙子, 洗衣�? 矿物, 种子, 肥料, 谷物, 金属粉末, 面粉, ...

优点

• 实验室与现场均可使用

• 高度精确的人工分样工艹�/p>

• optimized splitting process by evenly spreading the sample over the hopper

• variable slot widths permit splitting of coarse bulk material

• 分样工艺根据DIN 51701

性能指标

Please note:
受样品材料性质和仪器配�?设定的影哌�/small>

作用原理

With sample splitters, one of the receptacles is used to pour a well mixed sample evenly into the dividing head. The material runs through the alternately arranged passages in the opposite direction into the two collecting receptacles under the dividing head outlets. With every operation the feed sample is halved. This can be repeated as many times as necessary until the required dividing quantity has been obtained.

根据技术改造和误差调整