FT-106普通磨斘�/span>堆积密度测定�?/span>

FT-106 Common abrasive bulk density tester

一－�/span>参照标准standard９�/span>

ISO9136９�/span>1989《粗磨粒　　堆积密度的测定》和行业标准JB．�/span>T7984.2-1999《普通磨料　　粗磨粒堆积密度的测定》的相关要求：�/span>GB/T20316.1-2009堆积密度测定仪要求；适用于检测制造固结磨具和涂附磨具的粗颗粒普通磨料的堆积密度

According to the international standard ISO9136:1989 "the determination of coarse grinding grain bulk density� and industry standards JB/T7984.2-1999 the relevant technical requirements of ordinary abrasive coarse grinding grain of bulk density determination, at the same time meet the requirements of GB/T20316.1-2009 bulk density meter;It is suitable to test the packing density of coarse grain grinding materials, which can be used in the manufacture of consolidation grinding tools and coated abrasive tools.

二．参数资料Technical Parameters

1.1漏斗材质：不锈钢：�/span>

Funnel material: stainless steel.

1.2漏斗尺寸：高�?/span>240mm；顶部直徃�/span>160mm；出口直径：(20±0.5)mm：�/span>

漏斗底部与测量筒上口的距离：＇�/span>76±1（�/span>mm测量筒尺寸：内径64mm：�/span>净高度62mm测量筒容积：.(200±0.5) cm3测量误差：≤±0.02g/cm3

Funnel dimensions: height 240mm, top diameter 160mm, outlet diameter: (20±0.5)mm, the distance between the bottom of the funnel and the top of the measuring cylinder:＇�/span>76±1（�/span>mm, measuring cylinder dimensions: inner diameter 64mm, net height: 62mm, measuring cylinder volume: (200±0.5) cm3, measurement error：≤±0.02g/cm3.
2.1测量误差９�/span>≤�?.02g．�/span>cm3、�/span>Measurement error：≤±0.02g/cm3.
2.2测量筒容积：200±0.5cm3、�/span>Measuring cylinder volume: (200±0.5) cm3.
2.3外形尺寸９�/span>230mm（长（�/span>×250mm（宽（�/span>×425mm（高（�/span>

Dimensions: 230mm (L) * 250mm (W) * 425mm (H)