1100℃迷你型马弗� (MF-1100C-S)/Mini Muffle furnace (1L)

主要特点

1、该款马弗炉体积只相当于笔记本大小，功率1KW,重量只有12kg，实验室必备通用型实验电炈�/span>

2、可作为实验室材料烧结炉、退火炉、熔炼炉、齿科炉等使�?/span>

3、装有通气口，作为氮气保护炉，氧化炉，炭化炉使�?/span>

技术参数Technical Parameters　　

视频展示
Power/Voltage 输入电源/电压	Power rated: 1KW (220V) 额定功率�?KW (220V) Voltage rated: AC 220V 50/60HZ 额定电压：AC 220V 50/60HZ
Furnace Construction 炉子结构	High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands 采用高纯氧化铝作为炉膛材料，**程度减小能量损失，比一般加热炉减少30%能耗、�/span> Two 8 mm diameter hose barb connectors (gas inlet and outlet) (see pic below) in the furnace back 炉体后面有两个�?mm 的通气口，可以在烧样时通入惰性气体�?nbsp; 炉体采用双层结构，中间设置风道，保证炉体表面温度和电气控制部分温度不超过60℃、�/span> 采用弹簧门扣，很好的解决了设备内膛因高温产生的收缩缝隙、�/span>
Working Temperature 工作温度	Max. Temperature: 1100�? 1 hr) **温度�?100� (1小时) Continuous working temperature: �?000ℂ�/span> 持续工作温度：≤1000ℂ�/span> Recommended Heating Rate: 5-40�?min 推荐升温速率�?-40�?分钟 Max. heating rate:50�?min **升温速率:50�?分钟
Temperature Controll 控温方式	PID automatic control and auto-tune function. 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing. 智能�?0段可编程控制 Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功胼�/span>
Thermocouple 热电偵�/span>	K type K垊�/span>
Heating Elements 加热元件	Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金）
Temperature Accuracy 控温精度	+/- 1ℂ�/span>
Dimensions 尺寸	Chamber size(L*D*H): 100*100*100mm (1L) 腔体尺寸(�?�?�?�?00*100*100mm (1L) Furnace size(L*W*H): 230*250*370mm 炉子尺寸(�?�?�?�?30*250*370mm
Net Weight 净里�/span>	12kg
Packing dimensions(L*W*H) 包装尺寸(�?�?�?	370*300*450mm（wooden case（�/span> 370*300*450mm（木箱）
Shipping weight 毛重	18kg
Warranty 质保	One year limited warranty with lifetime support (Such consumable parts as resistance wire are NOT supported by the warranty) 一年质保终身支持（消耗品如电阻丝不在质保范围内）
Attention 警示	The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen. 此设备腔体不密封，不能通入有毒有害，易燃易爆气体。可以加装进气接头，通惰性气体或者氧氓�/span> Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复、�/span> You shall place the sample in to a crucible. Never place sample on the chamber bottom directly. 建议将样品放进坩埚里。不要把样品直接放在腔底、�/span>
Compliance 认证	CE Certified CE认证 All electric components ( >24V) are UL / MET / CSA certified 所有电气部�? >24V)都有UL / MET / CSA 认证 The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. 可付费进行TUV(UL61010)或CSA讣�/span>
标准配置	高温手套 坩埚� 垫砖 电源纾�/span>