� � Descriptions

★桨叶式干燥器是一种在设备内部设置搅拌桨，使物料在桨叶的搅动下，与热载体以及表面充分接触，从而达到干燥目的的低速搅拌干燥器，结构形成一般为卧式，双轴或四轴、�/p>

★桨叶式干燥器分为热风式和传热式。热风式即通过热载体（如热空气）与被干燥有物料相互接触并进行干燥，在传导式中热载体并不与被干燥的物料直接接触，而是热表面与物料相互接触。传导式的优点是物料不易被污染，排气量小，热效率高，体积相对小，有利于节约能源及防止空气污染、�/p>

★适用范围：塑� 树脂类产� 无机药品 肥料 饲料 食品 化纤 染料 淀� 下水管污泥等产品的干燥，如：氯乙� 树脂 尼龙 聚乙� 聚丙� 淀� 氯化� 砂糖 氧化� 长石 烧碱粉末等各种粉粒及膏状料、�/p>

★Oar drier is low speed churner drier that equipped oars inside equipment.The damp raw material is churned to ample connecting wigh hot carry and the surface can ehoruzontal,double scrolls of fore scrolls.

★There are hot air style and transfer style two stlyles. The drying in hot style is completed through conection of hot air and material. Intranster style,material is connected with hot surface to drying,ia can prevent pollution of material.The air outlet is few,effection is high,small size,save energy and prevent pollution of air

★It is suitabie for drying in plastic,resin,inorganic compounds machine,fertilizer,feed.drestuff,starch,mud and so on �?/p>

� � Features

★设备紧凑，占地面积小，热传导系数高，热效率及佳，一般可达到80%-90%，是节能型设备、�/p>

★设备低转速，对颗粒状及片状物料的破碎性很小、�/p>

★对物料适应性广，操作弹性大，物料停留时间几分钟到几小时，可调、�/p>

★附属设备简单，投资少，操作费用底、�/p>

★一机多用，可作干燥、冷却、气体回收、反应加热（预杀菌）等工艺操作、�/p>

★Compact structure, small occupied space, high degree of heat conducting, best heat effeat , in general heat effect is attion to 80-90%,it is a kind of device in saing energy.

★Low speed, it is difficult to break into shaping of granule and slice raw materil.

★To raw material ,wide use ,easy to operate and raw material is adjustable from few minuters to few hours.

★The attachment is simple, and will save investment.

★There is many uses by it, such as drying, cooling recoverying air, kesoonding, heating and so on.

所有参数仅作参考，视物料情况，本公司拥有变更权利，并不另行通知、�/p>

All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardo