应用概述９�/p>

★喷雾干燥是液体工艺成形和干燥工业中*广泛应用的工艺�?适用于从溶液、乳

浊液、悬浮液和可泵性糊状液体原料中生成粉状、颗粒状产品。因此，当成品的颖�/p>

粒大小分布、残留水分含量、堆积密度和颗粒形状必须符合精确的标准时，喷雾干

燥是一道十分理想的工艺、�/p>

� Spray drying is a wide applied process in liquid process shaping and drying

industry. Particularly it is suitable for producing powder, granule or block solid

product from solution, emulsion, suspending liquid and pumped paste liquid.

Therefore when the distribution of granule size, final moisture, bulk density, granule

shape of finished product must be conformed to accuracy standard, the spray

drying is an ideal process.

设备特点９�/p>

★干燥速度快，液料经雾化后表面积大大增加，在热风气流中，瞬时可蒸发95%–�/p>

98%的水份，完成干燥时间仅需约数秒时间，特别适用于热敏性物料的干燥、�/p>

★压缩空气雾化，对黏性物体特别适合、�/p>

★生产过程简化，操作控制方便。通常用于湿含�?0-60%的溶液（特殊物料可达

90%）能一次干燥成粉粒产品，干燥后不需粉碎和筛选，减少生产工序，提高产�?/p>

纯度。对产品粒径，松密度、水份，在一定范围内可通过改变操作条件进行调整＋�/p>

简化了生产工艺流程，控制和管理都很方便、�/p>

� Quick drying speed, the surface area of material liquid through atomizing is

increased greatly. In hot air stream, 95% to 98% of moisture can be evaporated

at the moment. Particularly suitable to finish drying thermal sensitive material.

� Compressed air atomizing,it is used for sticky solution.

� The productive process is simple and the operation control is very convenient. For liquid containing 40-60% of damp(for special

material, may be 90%), it can be dried to powder product through drying one time. After dried, it is not necessary to crush and sieve.

So it reduces productive procedure and raises the purity of product. For the size, bulk density and moisture of product can be adjusted

within certain scope through changing operation condition. The control and management are very convenient.