留言询价
虚拟号将180秒后失效
使用微信扫码拨号
特点：耐磨耗试验机利用特定型号的砂轮， 在一定的荷重下， 对试片进行磨耗， 并以试片在经过固定的圈数磨耗后，所损失的重量来评估试片的耐磨耗特性， 如为耐磨材料以目测表面刮伤之状况来判定。适用于皮革、布类、涂料、纸、地砖、合板、玻璃、天然橡胶等耐磨试验、/p>
YL-3315T1 TABER Abrasion Tester is designed according to JIS ASTM and relative standards. The main function is using specified grinding wheel with specified Load to rub the surface of specimen and then evaluate the abrasion condition. The abrasion property could be indicated by measure the loss of weight volume and thickness. This tester is suitable used for abrasion test to leather fabric paint paper floor brick plywood glass natural rubber and so on.
规格９/p>
| 磨耗轮 Grinding Wheel |
直径2英吋，厚?/2英吋 Diameter 2 inches Width 1/2 inches |
| 左右磨耗轮中心间距 Betweencenters of Left & Right Grinding Wheels |
63.5mm |
| 磨耗轮与试片盘中心的间跜/p> Betweencenters of Specimen Tray and Grinding Wheel |
38mm |
| 试验盘转逞/p> Test Tray Rotating Speed |
采用步进马达?-100RPM可设 (出厂设定?0RPM) Use stepper motor 1-100RPM can set (default set value 60RPM) |
| 荷重 Loading |
250g?50g?000g(空重250g，附不锈钢砝?50g?50g调整) 250g 750g 1000g (bare weight 250g attached stainless steel weights 250g 750g adjustable) |
| 计数 Counter | 电子液晶显示8位数，自动停朹/p> Electron liquid crystal display 8 digits auto-stop. |
| 试片尺寸 Specimen Size | 110mm，中心孔7.5mm 110mm center hole 7.5mm |
| 厚度 Thickness | 1?mm，软性、硬性材料皆可测诔/p> 1~6mm soft and hard materials can be test |
| 试片夹持?/p> Specimen Clamping Block |
可轻松拆卸，做为更换湿磨耗测试、超厚试片等特殊测试，专用夹座配件使?选购项目) Easy remove as replacement wet abrasion test ultra-thick specimen and other special test used with specialized clampers (optional) |
| 配件 Accessories |
试片切刀1支、板 1支 砂纸10张、试片夹持框1 吸尘 1台（吸尘机自配） 1pc of specimen slicer 1pc of wrench 10pcs of sand papers 1pc of specimen clamping frame 1pc of vacuum cleaner (self-made) |
| 体积 Machine Dimension | 553847cm |
| 重量 Machine Weight | 30kg |
| 电源 Power | 1∮，AC220V 10 A |
暂无数据
TABER磨耗试验机的工作原理介绍？TABER磨耗试验机的使用方法？TABER磨耗试验机多少钱一台？TABER磨耗试验机使用的注意事顸/li>TABER磨耗试验机的说明书有吗＞/li>TABER磨耗试验机的操作规程有吗？TABER磨耗试验机的报价含票含运费吗？TABER磨耗试验机有现货吗＞/li>TABER磨耗试验机包安装吗＞/li>
移动?/p>
工商已核宝/p>
