密度(kg/m³)9/p>-
主要材质9/p>-
形状9/p>-
莫氏硬度9/p>-
看了分散刀头的用户又看亅/p>
虚拟号将 180 秒后失效
使用微信扫码拨号
CAT分散刀夳/strong>由不锈钢制成,可耐受高温高压消毒。均采用相同的连接头,可与所有驱动电机连接,并易于拆卸与清洗、/p> 主机 (1) X120 hand-held high speeddrive motor for small volumes electronically stabilised speed control for tools up to 17 mm speed: 11.000 - 33.000 rpm 140 W 115 or 240 Volt for shafts T6 T10 and T17. (2) X360 drive motor 360 Watt fixed speed: 45.000 rpm (for speed control please order speed control unit part no. 60493) 240 Volt for shafts up to 20 mm (short-time duty). P1500 Speed control unit for X 360 (3) X520 drive unit 500 Watt speed: 11.000 - 29.000 rpm for dispersing tools up to 30 mm (short- time duty only!!!) 115 or 240 Volt. (4) X520D same as X 520 but with LCD-display for speed (5) X620 drive unit 600 Watt built-in speed control 8.000 - 24.000 rpm. Only in 240 Volt available. (6) X1030 powerful and robust drive motor 1 kW with electronic speed control for tools up to 30 mm Speed range: 10.000 - 24.000 rpm (7) X1030D as X1030 but with LCD display (8) X1740 Very powerful drive motor steplessly adjustable without display suitable for all shafts up to T/G 40 5.000 - 22.000 rpm 1500 Watt. (9) XP28 Compressed-air motor air consumption 0?m³/min at 6 bar pressure max. 28.000 rpm (10) XP44 Compressed-air motor air consumption 0?5m³/min at 6 bar pressure max. 44.000 rpm ?)X520D same as X 520 but with LCD-display for speed ?)X1030D same as X1030 but with LCD display T6 Shaft 6 mm diameter 55 mm long complete with generator T6 Shaft 6 mm diameter 120 mm long complete with generator T10 Shaft 10 mm diameter complete with generator T17 Shaft 10 mm diameter complete with 17 mm generator T20 Shaft 20 mm diameter complete with generator G20 Shaft 20 mm diameter complete with generator T30 Shaft 20 mm diameter complete with 30 mm generator G30 Shaft 20 mm diameter complete with 30 mm generator T40 Shaft 20 mm diameter complete with 40 mm generator G40 Shaft 20 mm diameter complete with 40 mm generator additional charge for knife generator "*Please add one of the capitol letters to the order no. When ordering shafts: - V = for medium viscosities - N = for low viscosities - F = for fine dispersion tasks - M = knife generator (e.g. cut down of drugs tissues)" ?)DK30 Flow Through Chamber for shafts G20 and G30 ?)DK40 Inline-disperser consisting of drive unit X 1740 flow-through chamber with external cooling bench mounting device and G 40 generator. Also available without drive unit if there already is an X1740 drive unit 说明:更多产品信息请与我们联系或登录 数显型主朹/h1>
分散刀其/h1>
连续流研?/h1>
暂无数据