看了扬尘监测系统建大仁科RS-ZSYC3-*的用户又看了
虚拟号将180秒后失效
使用微信扫码拨号
噪声扬尘监测站是专门针对在建工程项目的监测设备。设备具有泵吸功能采用高精度PM'/span>PM2.5/PM10/TSP)传感器,并且带有空调除湿功能,该设备具月/span>1路百叶盒(温度、湿度、噪声、气压)采集?/span>1路风速采集?/span>1路风向采集?/span>1路继电器输出(默认可接现场二级继电器控制雾炮)?/span>1?/span>485从站输出;该设备可通过GPRS方式将数据上传监控软件平台,同时该主机能够外?/span>1?/span>LED屏(54cm*102cm)实时显示当前数值信息、/span>
供电 |
AC220V |
通信接口 |
GPRS无线传输 |
空气温度传感?/span> |
量程9span>-40}/span>70 分辨率:0.1ℂ/span> |
精度?#177;0.2ℂ/span> |
|
空气湿度传感?/span> |
量程9span>0}/span>1 00%分辨率:0.1% |
精度?#177;3% |
|
风速传感器 |
量程9span>0}/span>60m/s分辨率:0.1 m/s |
精度?#177;0.3m/s |
|
风向传感?/span> |
量程9span>8个方佌/span> |
噪声传感?/span> |
量程9span>30}/span>130db分辨率:0.1db |
精度?#177;0.5%FS |
|
PM |
量程9span>0}/span>1000ug/m3分辨率:1ug/m3 |
精度?#177;8%FS |
|
LED屎/span> |
尺寸54cm*102cm |
继电器输凹/span> |
1路,连接二级继电器,可控制现场雾炮发尃/span> |
设备支架 |
2/3米立杆(可选) |
电控箰/span> |
用于安装电源系统、除湿设备,内涵高精?span>PM传感?/span> |
型号 |
要素(默认含LED屏,支架,横梁及抱箍? |
RS-ZSYC3-2S |
PM2.5+PM10 |
RS-ZSYC3-2S-G |
PM2.5+PM10+联网 |
RS-ZSYC3-2S-4G |
PM2.5+PM10+4G联网 |
RS-ZSYC3-3S |
PM2.5+PM10+噪声 |
RS-ZSYC3-3S-G |
PM2.5+PM10+噪声+联网 |
RS-ZSYC3-3S-4G |
PM2.5+PM10+噪声+4G联网 |
RS-ZSYC3-5S |
PM2.5+PM10+噪声+温度+湿度 |
RS-ZSYC3-5S-G |
PM2.5+PM10+噪声+温度+湿度+联网 |
RS-ZSYC3-5S-5G |
PM2.5+PM10+噪声+温度+湿度+4G联网 |
RS-ZSYC3-8S |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力 |
RS-ZSYC3-8S-G |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+联网 |
RS-ZSYC3-8S-4G |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+4G联网 |
RS-ZSYC3-9S |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+TSP |
RS-ZSYC3-9S-G |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+TSP+联网 |
RS-ZSYC3-9S-4G |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+TSP+4G联网 |
RS-ZSYC3-10S |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+TSP+大气压力 |
RS-ZSYC3-10S-G |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+TSP+大气压力+联网 |
RS-ZSYC3-10S-4G |
PM2.5+PM10+噪声+温度+湿度+风?风向+风力+TSP+大气压力+4G联网 |
设备清单9/span>(选型不同,设备数量不同,具体以现场实际为准)
▆/span>风向传感?/span>1
▆/span>风速传感器1
▆/span>风速及风向用挡松/span>1
▆/span>多功能百叶盒(不?/span>PM2.5(/span>1
▆/span>电控箰/span>1组装好的电控箰/span>
▆/span>LED屎/span>1改装好的LED屎/span>
▆/span>三米立杆1
▆/span>横梁1
▆/span>U型卡1
▆/span>电控箱抱箍及对应螺栓2
▆/span>LED屏抱箍及对应螺栓2
▆/span>一母三公线1黑色45cm
暂无数据