产品展示

JRF燃煤热风炈�/h5>

详细信息

应用概述 General of applications

★该炉为通用性热风加热装置，与各种物料的干燥设备配套使用。　

★该炉集燃烧与换热为一体，以炉体高温部位进行换热的**间接加热技术。采取了耐高温措施，从而使其寿命比管式热风炉大大提高，输出热风温度可达300℃以上，同时采用了烟气逆向刷新换热片和负压吸式排烟方式，换热部位不积灰、无须清理，热性能稳定。可使用各种煤或木柴做燃料，并配有二次进风装置，燃烧完全。各项技术指标均达国�?*、�/p>

★The furnace is universal hot air heating device and can be equipped with all kinds of drying equipment.

★The furnace integrates combustions and heat exchange in one body and adopts the newest indirect heating technique with high temperature of furnace body to carry out heat exchange and adopts measures of high temperature resistant too. Compared with pipe type hot air furnace, its life is raised greatly. The temperature of hot air to be transmitted may reach over 300�?Meanwhile it adopts heat exchange sheet of conversed smoke and air and smoke exhausted way of negative pressure. So the part of heat exchange does not accumulate dust and not necessary to clean and the thermal property is constant. It can use different coal or as fuel. Because of equipped with secondary air in device, the combustion is fully.All technical indexes reach to domestic advanced level.

项目ltem 规格Specification	输出热量(104kcal/h) Heat capacity of output heat	输出风量(m3/h) Air volume of output	热风温度(�? T of hot air	耗煤�?kg/h) Consumption of coal	烟气引风机型叶�/p> Model of exhaust smoke fan
JRF4-2.5	2.5-3	560-1500	60-200	10-12	炊事用鼓风机80-100W Blast fan for cooking 800-100W
JRF4-4	4-5	930-3500	60-200	14-17	炊事用鼓风机200-300W Blast fan for cooking 800-100W
JRF5-8	6-8	1480-5600	60-200	18-24	Y5-47 2.8c 1.1Kw
JRF5-15	10-15	2160-12000	60-300	30-45	Y5-47 4c 2.2Kw
JRF5-30	25-30	4330-25000	60-300	70-85	Y5-47 4c 3Kw
JRF5-60	55-60	8660-45000	60-300	150-175	Y5-47 4c 5.5Kw
JRF5-80	75-90	12500-83000	60-300	180-220	GY2-1 11w
JRF5-100	80-100	14400-84000	60-300	220-290	GY2-1 11kw
JRF5-160	120-160	23000-134000	60-300	410-460	Y9-26 9D 18.5Kw

所有参数仅作参考，视物料情况，本公司拥有变更权利，并不另行通知、�/p>

All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!