Femtosecond Fiber Laser

Model: EFOA-SH

780 nm wavelength *

1.1 nJ pulse energy *

Small footprint *

Turn-key operation *

Highly stable *

Application

- Amplifier systems seeding

- Terahertz generation and detection

- Multi-photon microscopy

- Ultrafast spectroscopy

- Semiconductor device characterization

- Supercontinuum generation

- Optical coherence tomography

- Telecommunications

Second harmonic of Er-doped fiber laser operates at wavelength of 780nm and in a number of applications can replace the powerful yet less reliable solid-state Ti:S lasers. Easy to use design� turn-key operation� small footprint greatly facilitate any research in which the laser is involved. Lack of laser experience is not a problem with the fiber lasers� only general electronics and light physics knowledge is required to work with the unit.

EFOA-SH is also a perfect source for amplifier system seeding due to one-box compact design and lack of expensive pump laser as in case of Ti:S solid-state seed.

	EFOA-SH
Pulse Width (FWHM)� fs	<120*
Wavelength� nm	780��10
Average output power� mW	>80
Repetition rate� MHz	70**
Spectral width� nm	~7.5
Outputs:	Power output (switchable apertures***): >80 mW� 780 nm� TEM00� linearly polarized >160 mW� 1560 nm� TEM00� linearly polarized Service optical output: 1560 nm� FC/APC (~1 mW) RF SYNC Out: SMA connector Mode Lock Status: SMA connector (3.5/0V) and Led
Operating temperature� ��C	22��5
Warm up time for rated accuracy，min	20
Electrical data	110...220 VAC� 50/60Hz

Dimensions

Laser head� mm	270x270x122.5
Control unit� mm	230x200x130
Crystal oven control unit� mm	160x200x75

* - <100fs pulse durations available upon request

** - please indicate the necessary value when placing an order (from 25 to 80MHz).

*** - simultaneous dual output is also possible upon request with >80 mW@1560 nm and >80 mW@780 nm.