主要技术参�?nbsp; Main technical parameter

三辊机特炸�/p>

·机架采用焊接式框架结构，高冷硬合金辊简由电机驱动旋转、�/p>

·辊简及齿轮、皮带盘均作动平衡调整，故运转时噪音极低。液压系统采用先进的双油缸设计，液压元件采用进口元件的产品，所以设备具有动作灵敏度高、液压可靠性强，自动化程度高的优点、�/p>

·当冷却水中断或辊筒温度过高，电流过载或有异物落入辊管间、机器会自动停机、�/p>

·高灵敏度超声波传感器监测物料液面，当物料低于设定的液面值时，系统会停止工作，以保护设备安全、�/p>

·三辊机能相匹配喂上料入机、�/p>

三辊机工作原琅�/p>

·三辊机的每根辊筒都配有可精确控制的独立冷却系统，能设定并保持物料所需的工作温度、�/p>

·三根辊筒在工作中的三种工作位置：1相互脱离，用于清洗；2两辊夹紧，一根脱开，用于物斘�/p>

混合�?三辊夹紧，用于分散和出料、�/p>

Features- of the three-roll mill

·The welding type structure is adopted by the frame.The highly hard and cold molded alloy roll cylinder is driven and rotated by motor.

·The cylinder,gearing wheel and belt pulley are adjusted by dynamic balance so it operates with the lowest noise.The advanced doubie cylinderis designed for hydraulic system and the key hydraulic parts are chosen from Parker(lmported).So the mill has the advantages that it is highly sensitive in movement and its hydraulic is greatly reliable.

·When the cooling water stops or temperature of the cylinder is too high or the current overloads or something drops into the cylinders,the mill wilt stop automatically.

·The highly sensitive super-sonic sensor can watch the material's surface and the system will stop working when the quantity of the material is below the level of material surface designed.ln this way, the safety of equipments can be guaranteed.

The three-roll mill is able to match feeder,bead mill,etc.to be the effcient and continuous processing unit.

The three-roll mill' s working principle

·Each cylinder is matched with independent cooling system,which is accurately controlled.The working temperature required by the material can be set and kept evenly and steadily.

·There are three operation positions for the three rolls of the three roils:

a.Separated each other for cIeaning

b.Two rolls are clamped,the third one is separated for mixing the material.

c.Three rolls are clamped for dispersing and discharging of material.